Supermicro aw-4020c-t Mode D'Emploi
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ Workstation 4020C-T.
Installation and maintainance should be performed by experienced technicians
only.
The 4020C-T is a high-end, dual processor workstation based on the SC743T-645
4U tower/rackmount chassis and the H8DCE, a dual processor serverboard that
supports single or dual 940-pin AMD Opteron
TM
200 series processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
system and describes the main features of the H8DCE serverboard and the SC743T-
645 chassis, which comprise the 4020C-T.
Chapter 2: Installation
This chapter describes the steps necessary to install the system into a rack and
check out the workstation confi guration prior to powering up the system. If your
workstation was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.