LG SR906SB Manuel Du Propriétaire

5

Troubleshooting

36

Trouble

shoo

ting

The Power does not turned on. The power cord is

disconnected.

Plug the power cord into the wall outlet
securely.

No sound.

y The speaker wires are

disconnected.

y The speaker volume is

adjusted too low.

y The MUTE button is

pressed to ON.

y The selected decoding

mode is not matched to
the input signal format.

y Incorrect selection of

input source.

y Incorrect connections

between the
components.

y Check the speaker connections.

y Adjust the speaker volume.

y Press the MUTE button to cancel the

muting effect.

y Select the available decoding mode.

y Select the desired input source

correctly.

y Make connections correctly.

Radio stations can’t be tuned
in properly.

y The antenna is

positioned or connected
poorly.

y The signal strength of

the radio station is too
weak.

y No stations have been

preset or preset stations
have been cleared (when
tuning by scanning
preset channels).

y Check the antenna connection and

adjust its position.

y Tune to the station manually.

y Preset some radio stations, see page

28 for details.

Preset stations cannot be
received.

y An incorrect station

frequency has been
memorized.

y The memorized stations

are cleared.

y Memorize the correct station

frequency.

y Memorize the stations again.

Poor FM reception.

y No antenna is connected.

y The antenna is not

positioned for the best
reception.

y Connect the antenna.

y Change the position of the antenna.