Sony EBS-SP10 Manuel
SP-TUNE User Manual
11
This menu allows control of various “general” aspects of SP-TUNE behavior. Note that the *-
marked options are accessible only in Service mode, and not in Stand-alone mode.
A/V Input
– Allows user to select the audio/video input source (among the built-in Tuner and
available AV-inputs)
Current time – Allows to set the current time
Timer On
Timer On
– Allows display turn on time enable/disable and the time at which it occurs
Timer Off
– Allows display turn off time enable/disable and the time at which it occurs
Sleep timer
– Allows user to set the sleep timer
Def. power
– Configures default “power” state when the power is applied to the SP-TUNE (it is
connected to the mains). “Off” means the SP-TUNE will remain in a “sleep” state
after attaching power supply until switched on by IR transmitter command. “On”
means the SP-TUNE will switch on automatically (no need to manually switch
the power on after power supply connection).
after attaching power supply until switched on by IR transmitter command. “On”
means the SP-TUNE will switch on automatically (no need to manually switch
the power on after power supply connection).
8.4 Video
Settings
Brightness
-- Controls the brightness of the picture.
Contrast
-- Controls the contrast of the picture.
Color
-- Controls color saturation (0 corresponds to grayscale picture)
Startup Logo
-- Enabled or disables “logo” picture display after SP-TUNE powering on.