Nikon D7000 Manuel D’Utilisation

237

U

Press 

1 or 3 to choose monitor brightness. Choose higher 

values for increased brightness, lower values for reduced 
brightness.

When connecting the camera to a television or VCR via the video connector, be sure 
the camera video mode matches the device video standard (NTSC or PAL).

Reduce flicker and banding when shooting under fluorescent or mercury-vapor 
lighting during live view or movie recording. Choose a frequency which matches 
that of the local AC power supply.

Change time zones, set the camera clock, choose the date display order, and turn 
daylight saving time on or off.

G button

➜ B Setup menu

A

See page 49 for information on adjusting monitor brightness in live 
view or during movie recording.

G button

➜ B Setup menu

G button

➜ B setup menu

A

If you are unsure as to the frequency of the local power supply, test both options and choose 
the one that produces the best results. Flicker reduction may not produce the desired results 
if the subject is very bright, in which case you should select mode A or M and choose a smaller 
aperture (larger f-number) before starting live view. Note that flicker reduction is not 
available when On is selected for Movie settings > Manual movie settings (

0 60) in mode 

.

G button

➜ B Setup menu

Choose a time zone. The camera clock is automatically set to the time in 
the new time zone.

Set the camera clock (

0 27). If the clock is not set, a blinking B icon will 

appear in the control panel.

Choose the order in which the day, month, and year are displayed.

Turn daylight saving time on or off. The camera clock will automatically be 
advanced or set back one hour. The default setting is Off.