Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 Manuel D’Utilisation
Configure Switching Information
246
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable information displayed on the page.
Configure an MVR Group
To configure an MVR group:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching > MVR > Advanced > MVR Group Configuration.
6.
Use the MVR Group IP to specify the IP address for the new MVR group.
7.
Use the Count to specify the number of contiguous MVR groups.
This helps you to create multiple MVR groups through a single click of the Add button. If
the field is empty, then clicking the button creates only one new group. The field is
displayed as empty for each particular group. The range is from 1 to 256.
the field is empty, then clicking the button creates only one new group. The field is
displayed as empty for each particular group. The range is from 1 to 256.
8.
Click the Add button.
The MVR group is added.
Table 92. Advanced MVR Configuration
Field
Definition
MVR Max Multicast Groups
The maximum number of multicast groups that MVR supports.
MVR Current Multicast Groups
Displays the current number of MVR groups allocated.