Zanussi ZKG44500XA Manuel D’Utilisation

2. Pull the front end of the shelf support away

from the side wall.

3. Pull the supports out of the rear catch.

Install the shelf supports in the opposite

sequence.

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Refer to Safety chapters.

You cannot activate or operate

the oven.

The oven is not connected to an

electrical supply or it is connec-

ted incorrectly.

Check if the oven is correctly

connected to the electrical sup-

ply (refer to the connection dia-

gram if available).

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The oven does not heat up.

The automatic switch-off is acti-

vated. 

Refer to "Automatic switch-off". 

The oven does not heat up.

The Child Lock is on.

Refer to "Using the Child Lock".

The oven does not heat up.

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

It takes too long to cook the

dishes or they cook too quickly.

The temperature is too low or too

high.

Adjust the temperature if neces-

sary. Follow the advice in the

user manual.