Fujifilm X-T1 Manuel

Page de 152
56
The DRIVE Dial
 Continuous Shooting (Burst Mode)
 Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
  1
 Rotate the DRIVE dial to select CH (high-speed 
burst) or CL (low-speed burst).
  2
 Take photographs.  The camera will take pic-
tures while the shutter button is pressed; 
shooting ends when the shutter button is re-
leased, the maximum number of pictures has 
been taken, or the memory card is full.
 
R Frame rate varies with the subject, shutter speed, 
sensitivity, and focus mode and may slow as more 
shots are taken.
 
R The fl ash turns off  automatically; the previously-se-
lected fl ash mode is restored when burst shooting 
is disabled.
 
R Additional time may be required to record pictures 
when shooting ends.
 
R If fi le numbering reaches 999 before shooting is 
complete, the remaining pictures will be recorded 
to a new folder (
P 93).
 
R In some drive modes, shooting may not begin if the 
space available on the memory card is insuffi
  cient.
  Focus and Exposure
  Focus and Exposure
To vary focus and exposure with each shot, select fo-
cus mode C; in other modes, focus and exposure are 
determined by the fi rst shot in each series.
 
Q When CH is selected, the camera 
focuses using the focus frames 
shown at right.
 
Q Focus tracking performance var-
ies with aperture, sensitivity, and 
shooting conditions.
1000
F3.3
CH mode focus frames