Fujifilm FUJIFILM X100S Manuel Du Propriétaire

Automatically vary settings over a series of pictures.

 Press the DRIVE button to display drive options and rotate the dial or press it up or down to highlight 

one of the following:

±1

±

±

Press the command dial left or right to highlight a bracketing amount.  Each time the shutter button is 
pressed, the camera will take three shots: one using the metered value for exposure, the second over-
exposed by the selected amount, and the third underexposed by the same amount (regardless of the 
amount selected, exposure will not exceed the limits of the exposure metering system).

Press the command dial left or right to highlight a bracketing amount.  Each time the shutter is released, 
the camera will take a picture at the current sensitivity (

P 44) and process it to create two additional copies, 

one with sensitivity raised and the other with sensitivity lowered by the selected amount (regardless of the 
amount selected, sensitivity will not exceed ISO 6400 or fall below ISO 200).

Each time the shutter is released, the camera takes one shot and processes it to create copies with the fi lm 
simulation settings selected for 

X FILM SIMULATION BKT in the shooting menu (P 73).

Each time the shutter button is pressed, the camera takes three shots with diff erent dynamic ranges (

P 73): 

100% for the fi rst, 200% for the second, and 400% for the third.  While dynamic range bracketing is in eff ect, 
sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in eff ect is restored when 
bracketing ends.

Press MENU/OK to select the highlighted option.

 Take photographs.