Fujifilm FinePix AX200 / AX205 Manuel Du Propriétaire

Page de 117
vii
 
Notes and Cautions
•  Do not use batteries that are 
leaking, deformed, discolored.
•  Do not store batteries in warm or 
humid places.
•  Keep the batteries out of reach of 
babies and small children.
•  Make sure that the battery polarity 
(E and F) is correct.
•  Do not use new with used 
batteries. Do not use charged and 
discharged batteries together.
•  Do not use different types or 
brands of batteries at the same 
time.
•  If you do not intend to use the 
camera for a long period of time, 
remove the batteries from the 
camera. Note if the camera is left 
with the batteries removed, the 
time and date settings are cleared.
•  The batteries feel warm right after 
being used. Before removing the 
batteries, turn the camera off 
and wait for the batteries to cool 
down.
•  Since batteries do not work well in 
cold weather or locations, warm 
the batteries by placing them 
inside your garments before use. 
Batteries do not work well when 
cold. They will work again when 
the temperature returns to normal.
•  Soil (such as fingerprints) on 
the battery terminals makes the 
batteries charge less reducing the 
number of images. Carefully wipe 
the battery terminals with a soft 
dry cloth before loading.
If any liquid at all leaks from 
the batteries, wipe the battery 
compartment thoroughly and 
then load new batteries.
If any battery fluid comes 
into contact with your hands 
or clothing, flush the area 
thoroughly with water. Note 
that battery fluid can cause 
loss of eyesight if it gets into 
your eyes. If this occurs, do 
not rub your eyes. Flush the 
fluid out with clean water and 
contact your physician for 
treatment.
Using the AA-size Ni-MH batteries 
correctly
•  Ni-MH batteries left unused in 
storage for long periods can 
become “deactivated”. Also, 
repeatedly charging Ni-MH 
batteries that are only partially 
discharged can cause them 
to suffer from the “memory 
effect”. Ni-MH batteries that 
are “deactivated” or affected by 
“memory” suffer from the problem 
of only providing power for a 
short time after being charged. To 
prevent this problem, discharge 
and recharge them several times 
using the camera’s “Discharging 
rechargeable batteries” function. 
Deactivation and memory are 
specific to Ni-MH batteries and are 
not in fact battery faults. 
See OWNER’S MANUAL for the 
procedure for “Discharging 
rechargeable batteries”.
  CAUTION
Do not use the “Discharging 
rechargeable batteries” function 
when alkaline batteries being used.
•  To charge Ni-MH batteries, 
use the quick battery charger 
(sold separately). Refer to the 
instructions supplied with the 
charger to make sure that the 
charger is used correctly.
•  Do not use the battery charger to 
charge other batteries. 
•  Note that the batteries feel warm 
after being charged.
•  Due to the way the camera is 
constructed, a small amount of 
current is used even when the 
camera is turned off. Note in 
particular that leaving Ni-MH 
batteries in the camera for a long 
period will overdischarge the 
batteries and may render them 
unusable even after recharging.
•  Ni-MH batteries will self-discharge 
even when not used, and the time 
for which they can be used may 
be shortened as a result.
•  Ni-MH batteries will deteriorate 
rapidly if overdischarged (e.g. 
by discharging the batteries in a 
flashlight). Use the “Discharging 
rechargeable batteries” function 
provided in the camera to 
discharge the batteries.
•  Ni-MH batteries have a limited 
service life. If a battery can only be 
used for a short time even after 
repeated discharge-charge cycles, 
it may have reached the end of its 
service life.
Disposing of Batteries
•  When disposing of batteries, do 
so in accordance with your local 
waste disposal regulations.
3
  Notes on both models ( 
1
 , 
2
 )
AC Power Adapter
Always use the AC Power Adapter 
with the camera. The use of an AC 
Power adapter other than FUJIFILM 
AC Power Adapter can be damaged 
to your digital camera.
For details on the AC power adapter, 
refer to the OWNER’S MANUAL of 
your camera.
•  Use the AC power adapter for 
indoor use only.
•  Plug the connection cord plug 
securely into the DC input 
terminal.
•  Turn off the FUJIFILM Digital 
camera before disconnecting the 
cord from the DC input terminal. 
To disconnect, pull out the plug 
gently. Do not pull on the cord.
•  Do not use the AC power adapter 
with any device other than your 
camera.
•  During use, the AC power adapter 
will become hot to the touch. This 
is normal.