Fujifilm FinePix S200EXR / S205EXR Manuel Du Propriétaire

I Continuous Shooting (Burst Mode)

Capture motion or automatically vary selected settings over a series of pictures.

  Choose a continuous shooting.

Press the 

I button and rotate the command dial to choose from 

the following options:

I (top 6)

The camera takes up to six pictures while the shutter button is pressed.

 1

L (last 6)

The camera takes up to 40 pictures while the shutter button is pressed, but only the last six frames are 
recorded.

 2

J (top 24)

The camera takes up to 24 pictures while the shutter button is pressed.

 1, 3

M (last 24)

The camera takes up to 40 pictures while the shutter button is pressed, but only the last 24 frames are 
recorded.

 2,  3

O

(AE BKT)

Each time the shutter button is pressed, the camera takes three shots: one using the metered value for 
exposure, the second overexposed by the amount selected for 

J AE BKT EV STEPS in the shooting 

menu (pg. 81), and the third underexposed by the same amount (the camera may not be able to use 
the selected bracketing increment if the amount of over- or under-exposure exceeds the limits of the 
exposure metering system).

X

(fi lm simulation 

BKT)

Each time the shutter button is pressed, the camera takes three shots, each with a diff erent option 
selected for 

P FILM  SIMULATION:  c PROVIA for the fi rst shot, d Velvia for the second, and 

e ASTIA for the third.

 2

Y

(dynamic range 

BKT)

Each time the shutter button is pressed, the camera takes three shots, each with a diff erent option 
selected for 

U DYNAMIC  RANGE:  A 100% for the fi rst shot, B 200% for the second, and 

C 400% for the third.

 2,  4

Continuous shooting off .  One picture is taken each time the shutter button is pressed.

1  The maximum number of shots per burst when an option other than OFF is selected for 

j CCD-RAW is three.

2  Available only when OFF is selected for 

j CCD-RAW.

3 

O IMAGE SIZE set to Q, N ISO to 400 or above, U DYNAMIC RANGE to A.

4 

N ISO set to 3200 or below. When O is selected for O IMAGE SIZE, N ISO set to between 400 and 3200.