Fujifilm FinePix S5700 / S5800 Manuel Du Propriétaire
136
Connecting to a PC
CAUTION
• FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800 is compatible with PTP (Picture Transfer
Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-
compatible camera is a camera which can recognize
the PC and printer automatically when connected.
Protocol)/MTP (Media Transfer Protocol). A PTP/MTP-
compatible camera is a camera which can recognize
the PC and printer automatically when connected.
• Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately). If the camera suddenly loses power
during data exchange, the Memory Card or internal
memory could be damaged.
during data exchange, the Memory Card or internal
memory could be damaged.
• Do not disconnect the USB cable when the camera is
communicating with a PC. If disconnecting the USB
cable during communication, the files on the Memory
Card or internal memory may cause damage.
cable during communication, the files on the Memory
Card or internal memory may cause damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable is connected correctly and
pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (
➝p.137-138).
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
• Before replacing the Memory Card, always disconnect
the camera from the PC. See p.137, 138 for information
on the disconnection procedure.
on the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable, always check that the
indicator lamp is off.
disconnecting the USB cable, always check that the
indicator lamp is off.
• Always use FinePixViewer to transfer images with voice
memos to a PC.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.
D Set a PC.
Windows 98 SE / Me / 2000 Professional /
Macintosh
Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the Power switch to OFF to turn off the camera and then
disconnect it from the PC.
disconnect it from the PC.
*
Screen for Windows 2000 Professional