Fujifilm FinePix S9800 / S9900W Manuel Du Propriétaire

Page de 143
viii
For Your Safety
 Use only as part of a wireless network.
FUJIFILM does not accept liability for 
damages resulting from unauthor-
ized use.  Do not use in applications 
requiring a high degree of reliability, 
for example in medical devices or 
other systems that may directly or 
indirectly impact human life.  When 
using the device in computer and 
other systems that demand a greater 
degree of reliability than wireless 
networks,  be  sure  to  take  all  neces-
sary precautions to ensure safety 
and prevent malfunction.
 Use only in the country in which the 
device was purchased. 
This device conforms to regula-
tions governing wireless network 
devices in the country in which it 
was purchased.  Observe all location 
regulations when using the device.  
FUJIFILM does not accept liability for 
problems arising from use in other 
jurisdictions.
 Wireless data (images) may be 
intercepted by third parties.
The security of data transmitted over 
wireless networks is not guaranteed.
 Do not use the device in locations 
subject to magnetic fields, static 
electricity, or radio interference. 
Do not use the transmitter in the vi-
cinity of microwave ovens or in other 
locations subject to magnetic fields, 
static electricity, or radio interfer-
ence that may prevent reception of 
wireless signals.  Mutual interference 
may occur when the transmitter is 
used in the vicinity of other wire-
less devices operating in the 2.4 GHz 
band.
 The wireless transmitter operates in 
the 2.4 GHz band using DSSS and OFDM 
modulation.
Wireless Network Devices: 
Cautions
 This device operates on the same fre-
quency as commercial, educational, 
and medical devices and wireless 
transmitters.  
It  also  operates  on  the  same  fre-
quency  as  licensed  transmitters 
and special unlicensed low-voltage 
transmitters  used  in  RFID  tracking 
systems for assembly lines and in 
other similar applications.
 To prevent interference with the 
above devices, observe the following 
precautions.  
Confirm that the RFID transmitter is 
not in operation before using this 
device.  If the device causes interfer-
ence to premises radio stations used 
for RFID tracking, immediately either 
relocate this device or stop the emis-
sion  of  radio  waves.    If  you  notice 
that this device causes interference 
in low-voltage RFID tracing systems, 
contact a FUJIFILM representative.
2.4DS/OF4
This sticker indicates 
that this device 
operates in the 
2.4 GHz band using 
DSSS and OFDM 
modulation and 
may cause interfer-
ence at distances of 
up to 40 m.