Fujifilm FinePix XP10 / XP11 Manuel Du Propriétaire

•  Wash sunscreen or suntan oil off  the 

camera immediately with warm water if you 
accidentally spill or apply any.  The oils may 
discolor the camera.

•  Should you subject the camera to substantial 

vibration, shock or pressure, it may be less 
resistant to water.  Contact the store where you 
purchased the camera, or our Repair Service.

•  Be sure to wipe any dirt or sand off  the 

waterproof sealing material or its contacting 
surface.  Dirt or sand may scratch the material 
or the surface, making the camera less resistant 
to water.

•  To wash sand, dirt or dust off  the camera, rinse 

it under running tap water or soak it in a bowl 
of fresh water for 2 or 3 minutes.

•  Do not use any soapy water, mild detergents, 

alcohol or similar liquids to clean the camera.  
They may make the camera less resistant to 
water.

•  After using the camera, wipe any water or 

dirt off  the camera with a dry cloth, close the 
battery-chamber cover securely, and then soak 
the camera in fresh water for 10 minutes.  Next, 
dry the camera completely.

•  Do not leave the camera in a location where 

the temperature is 40°C (104°F) or higher, or 0°C 
(32°F) or lower. 

•  The waterproof sealing material is replaceable 

at cost.  The material should be replaced once a 
year to maintain the camera’s water resistance.  
For details, contact the store where you 
purchased the camera, or our Repair Service.

■  

When the camera is used in cold climates, 
battery performance and the number of pictures 
that can be taken are temporarily reduced. We 
recommend keeping the camera in a thermal 
case or inside clothing when using it in cold 
climates.
•  Use the included NP-45A battery.
•  The speed with which the monitor displays 

information is reduces in low temperatures. This 
is a characteristic of liquid crystal displays, and 
is not a malfunction.