Samsung Samsung SMART Signage TV 48” EB48D Manuel D’Utilisation

145

 

― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than 

the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.

 

― Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical 

frequency to 60Hz using the CDT product before you exchange it with the LCD product.

30 ~ 61 kHz

60 ~ 75 Hz

1366 x 768 @ 60 Hz

1366 x 768 @ 60 Hz

The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC 
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by 
referring to the graphics card user manual.

 

― PC mode is not support interlaced signal.

IBM, 720 x 400

31.469 

70.087 

28.322 

-/+

MAC, 640 x 480

35.000 

66.667 

30.240 

-/-

VESA, 640 x 480

31.469

59.940

25.175

-/-

VESA, 640 x 480

37.861

72.809

31.500 

-/-

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 800 x 600

37.879 

60.317 

40.000 

+/+

 

-

Horizontal Frequency
The time required to scan a single line 
from the left to the right side of the 
screen is called a horizontal cycle. The 
reciprocal number of a horizontal cycle 
is called horizontal frequency. Horizontal 
frequency is measured in kHz.

 

-

Vertical Frequency
The product displays a single image 
multiple times per second (like a 
fluorescent light) to display what the 
viewer sees. The rate of a single image 
being displayed repeatedly per second is 
called vertical frequency or refresh rate. 
Vertical frequency is measured in Hz.