Samsung MM-J330 Manuel D’Utilisation

Page de 20
16
 
English
English
 
17
4.  To stop recording, press the STOP (@) button. 
The product automatically creates and saves 
recorded files in .MP3 format (SAM-XXXX.MP3).
5.  To remove the USB device safely, press the STOP 
(@) button once again. After recording, a directory 
named “RECORDING(DISCxxxx)”(FULL CD 
RECORDING), “RECORDING”(TRACK 
RECORDING), “CD COPY”(MP3/WMA-CD),  
“TUNER RECORDING” or “AUX RECORDING” 
is created on your USB device.
•  Do not disconnect the USB or the AC Cord during 
recording as this may cause damage to the file.  
•  If you disconnect the USB device during a recording, 
the unfinished recording file may get damaged and 
cannot be deleted. If this occurs, please connect the 
USB device to a PC, back up the data stored in the 
USB, and then format it.
•  When the USB memory has insufficient free space, 
the system will display “NOT ENOUGH MEMORY”. 
•  The USB device or HDD you are recording to must 
be  formatted in the FAT file system. The NTFS file 
system is not supported. 
•  When you use the CD high speed search function, 
CD recording is not available.
•  Sometimes, the recording time may be longer with 
some USB devices.
•  The REPEAT function is set to "OFF" automatically 
and is not available during a recording.
•  You cannot record the radio when searching or when 
no available station is found in the Tuner mode.
•  Note that setting the input level too loud when 
recording music from an external device through 
the AUX or USB channel may cause noise in the 
recording. If this occurs, lower the external device’s 
volume level.
•  The maximum TUNER/AUX recording time is 5 
hours.
Recording Function
You can record from a CD, radio broadcast, or an 
external source to a USB storage device.  
1.   
Connect an external USB storage device to the 
USB jack on your product.
2.   Play a disc, tune to a station, or connect an 
external source to your product.
CD  
•  Press the 
 button on the main unit or press 
the FUNCTION button on the remote control to 
select the MP3/CD function.
•   Press  the  OPEN/CLOSE button to open the 
disc tray.
•   Insert a CD and press the OPEN/CLOSE 
button to close the disc tray.
•   Use the CD selection buttons ( [ or ] ) to 
select the desired song.
Tuner
•  Press the 
  button on the main unit or press 
the FUNCTION button on the remote control to 
select the FM function.
•  Tune to a station you want to record.
External Source 
•  Connect an External Component/MP3 player to 
your product.
•  Press the 
 button on the main unit or press 
the FUNCTION button on the remote control to 
select the <AUX> input.
•  Play a song from the external device.
3.  Press the USB REC button to start recording.
CD  
•  “TRACK RECORDING” is displayed and  CD 
   recording starts.
•   Press and hold the USB REC button to start 
recording all tracks on the disc. "FULL CD 
RECORDING" is displayed.
MP3/WMA-CD
•  Press the USB REC button. The currently 
playing file is copied onto the USB device.
•  Press and hold the USB REC button. All the 
files in the current folder are copied onto the 
USB device.   
COPY: “CHECK”“START”“COPY XX”“COPY END”  
   is displayed. When the recording is done, 
“STOP” will be displayed.  
•  If there is a duplicate file name, "FILE EXIST" is  
displayed, and the function is canceled.
Tuner /External Source
•  Tuner: "TUNER RECORDING""RECORD"
•  External Source : "AUX 
RECORDING""RECORD"
MM-J320-EN-ENG-20161103-cms.indd   16
2016/11/3   9:06:53