Samsung 230W Giga System Manuel D’Utilisation
16
English
English
16
English
17
Listening to Radio
After you have set the timer, the unit will start
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.
1. Press the TIMER ON/OFF button to cancel the
timer.
2. Press the TIMER ON/OFF button again to restart
the timer.
• When you select the OFF-TIMER mode, the TIMER
RECORDING and TIMER function are not available.
Cancelling the Timer
You can store up to 15 FM stations.
Using buttons on the Remote Control
1. Press the TUNER button to select FM.
2. Tune to the desired station.
2. Tune to the desired station.
• Preset Tuning : Press the TUNING MODE button
to select PRESET, and then press TUNING [ or
] button to select the preset station.
] button to select the preset station.
• Automatic Tuning : Press the TUNING MODE
button to select MANUAL, and then press
and hold the TUNING [ or ] button to
automatically search for active broadcasting
stations.
stations.
• Manual Tuning : Press the TUNING MODE
button to select MANUAL, and then briefly
press the TUNING [ or ] button to increase
or decrease the frequency incrementally.
Using buttons on the Main Unit
1. Press the TUNER/AUX button to select FM.
• You may use the ], [ buttons or the
VOLUME/JOG control on the main unit instead
of the , or . button to adjust settings in Steps
4 through 9.
of the , or . button to adjust settings in Steps
4 through 9.
• If the switch-on or -off time is the same as the
timer recording time, only the switch-on or
-off time is effective, and the timer recording
time is not applied.
-off time is effective, and the timer recording
time is not applied.
• If the auto timer is turned on, the MP3/CD or
USB function may require an additional step to
be activated depending on the disc (or device).
It is better for you to select the tuner function
instead.
be activated depending on the disc (or device).
It is better for you to select the tuner function
instead.
2. Tune to the desired station.
• Preset Tuning : Press the STOP ( @ ) button to
select PRESET, and then press [ or ] button
to select the preset station.
• Automatic Tuning : Press the STOP ( @ ) button
to select MANUAL, and then press and hold the
[ or ] button to automatically search for
[ or ] button to automatically search for
active broadcasting stations.
• Manual Tuning : Press the STOP ( @ ) button
to select MANUAL, and then briefly press the
[ or ] button to increase or decrease the
[ or ] button to increase or decrease the
frequency incrementally.
Selecting Mono or Stereo
1. Press the MO/ST button.
• Each time you press the button, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM
station.
Presetting Stations
Example : Presetting FM 89.10 in the memory.
1. Press the TUNER button to select FM.
2. Press the TUNING MODE button to select the
2. Press the TUNING MODE button to select the
<MANUAL> mode.
3. Press the TUNING [ or ] button to select
<89.10>.
4. Press the MEMORY button.
• FM followed by a flashing number appears in
the display. That number is the current preset
number.
number.
5. Press the TUNING [, ] or the ,, . buttons to
scroll through and select a preset number.
• You can select a number from 1 to 15.
6. Press the ENTER (
) button.
• Press the ENTER (
) button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune to a preset station, press the TUNING [
or ] to select a channel.
• You can also use the [ or ] button on the
front panel instead of the TUNING [ or ]
button in step 3, 5, 7.