Samsung HW-H355 Manuel D’Utilisation

●

functions

You can select D.IN, AUX, BT, TV input or USB input.
Press an appropriate button on the remote control to select a desired mode, or press (   ) to select one from: 
D.IN, AUX, BT, TV or USB mode.

D.IN

AUX 

BT 

TV 

USB

The unit turns off automatically in the following situations:

• BT/TV/USB/D.IN MODE

 

-  If there is not connected for about 25 minutes.   

• AUX Mode

 

- When the AUX cable is connected, if no key is pressed on the remote or unit panel for about 8 

hours.

 

- If the AUX cable is disconnected for about 25 minutes.

  

 



Use the provided cable if a USB flash memory device cannot be connected directly to the unit.

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each 
other using a short wireless connection.
• A Bluetooth device may cause noise or malfunction, depending on usage, when:

 

- A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or 

the Soundbar. 

 

- It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.

 

- It is exposed to electrical interference from same frequency-band devices including medical 

equipment, microwave ovens, and wireless LANs.

• Pair the Soundbar with the Bluetooth device while they are close together.
• The further the distance is between Soundbar and Bluetooth device, the worse the quality is. 

If the distance exceeds the Bluetooth operational range, the connection is lost.

• In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
• The Bluetooth connection only works when the Bluetooth device is close to the set. The connection 

will be automatically cut off if the Bluetooth device is out of range. Even within range, the sound 
quality may be degraded by obstacles such as walls or doors.

• This wireless device may cause electric interference during its operation.