Samsung AQV12PSCN Manuel D’Utilisation

Wall

<20mm

Plastic 

Anchor

2.  Fix the indoor unit.
If you fix the indoor unit on a wall 
(1)   Fix the installation plate to the wall giving attention to the weight of the indoor unit. 

If you fix the indoor unit on a window frame 
(1)   Determine the positions of the wooden uprights to be 

attached to the window frame. 

(2)   Attach the wooden uprights to the window frame giving 

attention to the weight of the indoor unit.

(3)   Attach the installation plate to the wooden upright using 

tapping screws.

If you fix the indoor unit on a gypsum board 
(1)   Use stud finder to find out locations of the studs. 
(2)  Fix the plate hanger on two studs.

•   If you mount the plate to a concrete wall using plastic anchors, make sure that

gaps between the wall and the plate, created by projected anchor, is less than 

20mm.

•   Search for other spots if there are less than two studs, or the distance between the studs are different from the

plate hanger.

•  Fix the installation plate without inclining to one side.

•   Do not connect two or more different cables to extend the length.  

It may cause fire.

•   Make sure that a wall can withstand the weight of the product. If you install the product in a place where it is not

strong enough to withstand the product weight, the unit could fall and cause injury.



  When you install the unit, make first refrigerant connections and then electrical connections. 

Connect the air conditioner to grounding system before performing the electrical connection.  

If unit is uninstalled, first disconnect electrical cables, then refrigerant connections.

If the outdoor unit is more than 5 meters away from the indoor unit, you must extend the cable.  

The maximum length of the cable is 15(09/12)/20(18/24) meters.

•   Connect the power cable to the auxiliary circuit breaker. If every pole fails to connect to

the power supply, it must be incorporated in a wire with a contact opening of ≥3mm.

AQV09/12PC

3G, 1.5mm

² H07RN-F

4G, 1.5mm

² H07RN-F

20A

AQV09/12PB

3G, 2.5mm

² H07RN-F

3G, 1.5mm

² H07RN-F

20A

2G, 0.75mm

² H05RN-F

AQV18/24P

3G, 2.5mm

² H07RN-F

3G, 1.5mm

² H07RN-F

25A

2G, 0.75mm

² H05RN-F