3M stretchable tape load containment system brochure Manuel D’Utilisation

A. PRODUCT USE: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M
believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the
conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are
uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and
suitable for the user’s method of application.

B. WARRANTY AND LIMITED REMEDY: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products,
3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different
warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and
seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price. 

C. LIMITATION OF LIABILITY: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

© 2006, 3M. All rights reserved.     70-0710-0328-2

3

Building 21-1W-10
900 Bush Avenue
St. Paul, MN 55144-1000
1 800 362 3550
www.3M.com/packaging

Bringing it all together
for productivity and
product quality

• Provides 

ventilation

• Provides 

stability

•

Preserves carton integrity

•

Minimizes disposal costs

•

Reduces material costs

Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

8886       Clear

Linear

Synthetic       720     

40        

56        

7

Low Density  Rubber 

Polyethylene

Resin

Power: 115/230 Volts, 50/60 Hz, 12.6/6.3 Amps, 1450 Watts

Approximate shipping weight: 1,100 lbs

Operating rate: Dependent on wrapping pattern, but averages 20-30 pallets per hour

Operating conditions: Dry indoor environment

Load capacity: Wrapping pattern height up to 8.75', 4,400-pound capacity 

Mast height: Choice of 8'8" or 10'8"; both fold down

Load: Best used with “A” and “B” loads with less than 3" overhang

Turntable diameter: 4.25 feet; integrated

Construction: Galvanized base frame and powder coated finish for durability

*Tensile per ASTM 3579 based on 36mm tape width.

15

16

Approximate yield per 500 meter 
roll stretched – 3,250 meters

Approximate tape weight 
per 500 meter roll – 105 oz

Rolls per case – 6