Autodesk autocad electrical 2005 Guide D’Installation Rapide
Modifying
Attributes
|
77
7
In the Schematics Components (current project) dialog box, notice the
master control relay still needs to be placed.
master control relay still needs to be placed.
8
Click the Close button.
Modifying Attributes
You can align the inserted schematic component footprints with existing
footprints.
footprints.
To align footprints vertically
1
Click the drop-down arrow on the Scoot tool to access the Align tool.
Menu
Components
➤ Align
2
Respond to the prompts as follows:
Select component to align with (Horizontal/<Vertical>): Enter V, press ENTER
Select component to align with (Horizontal/<Vertical>):
Select the power on button on the top, left of the layout (1)
Select objects:
Select the three components that were just inserted (2-4), right-click
Select component to align with (Horizontal/<Vertical>):
Select the power on button on the top, left of the layout (1)
Select objects:
Select the three components that were just inserted (2-4), right-click
The components are aligned vertically.
Use the same procedure to align the schematic component footprints
horizontally.
horizontally.
1
2
3
4