Sony HT-K170 Manuel D’Utilisation

16

To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to the
speaker system you have. Then, adjust the volume of
each speaker.

Note that you must connect the rear speakers and/or
one center speaker to do the following adjustments.

The amplifier offers you four center modes: Phantom,
Wide, Normal and 3 Stereo. Each mode is designed for
a different speaker configuration.

Press SOUND FIELD repeatedly to select the PRO
LOGIC sound field.

Press CENTER MODE repeatedly until the
indicator for the center mode you want lights in
the display.

 

Select the center mode as follows:

• To match the speaker system that is packed together with

this amplifier, we recommend that you set the center
mode to NORMAL or WIDE and turn on the subwoofer.

• If you are using a different speaker system, select the

mode that best suits your speaker system’s configuration.

The sound of the
center channel is
output from the front
speakers.

The center channel
fully reproduces the
entire audio spectrum

The bass sound of the
center channel is
output from the front
speakers.

The sound of the rear
channel is output
from the front
speakers.

Front and rear
speakers, no
center speaker

Front and rear
speakers, and
a large center
speaker

Front and rear
speakers, and
a small center
speaker

Front and center
speakers, no rear
speaker

PHANTOM

WIDE

NORMAL

3 STEREO
(3 Channel Logic)