TP-LINK TL-WR740N Manuel D’Utilisation

 

- 24 - 

 

Figure 4-6  LAN 

¾

 

MAC Address - The physical address of the Router, as seen from the LAN. The value can't 

be changed. 

¾

 

IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation 

(factory default: 192.168.1.1). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

)

 

a.  If you change the IP Address of LAN, you must use the new IP Address to log in the Router.   

b.  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP 

server will change accordingly at the same time，while the Virtual Server and DMZ Host will 
not take effect until they are re-configured. 

Choose menu “Network  → WAN”, you can configure the IP parameters of the WAN on the 

screen below. 

1.  If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will 

automatically get IP parameters from your ISP. You can see the page as follows (Figure