Macsense Connectivity xrouter mih-120 Manuel D’Utilisation

TROUBLESHOOTING

This chapter provides solutions to problems that may occur during

installation and operation of the XRouter MIH-120.

The Link LED is off

• Check that all connectors are firmly plugged-in.

• Check the power adapter making sure it is plugged into an

electrical outlet.

The collision LED is always lit

• Make sure the 10BASE-T cable has not exceeded the

maximum 100-meter length limit.

• Check all connectors to make sure they are firmly

plugged into the appropriate ports.

• Use category 5 cables as this grade of cable will give you

the highest quality connection to the XRouter.

• Check the RJ-45 connectors at both ends of the cable to

make sure there is no faulty wiring.

Can't connect to MIH-120 XRouter via Web browser

• Verify that the IP address 192.168.1.1 has been correctly

entered in the URL field.

• Check the network cable connection and LAN LED indicator

on the XRouter.

• Check out the TCP/IP setup on your client. Type "winipcfg"

on DOS prompt under Windows 95 or open the TCP/IP con-
trol panel on the Mac OS platform. The client should get an
IP address of 192.168.1.x (where "x" is from 1 to 252.)

Troubleshooting