Homelite 19591a Manuel D’Utilisation

1. Make sure blower has been turned off. Remove all tube

attachments from the blower. (See illustration 1.)

3. Loosen clamp and place over exposed end of upper elbow.

Install swivel onto adapter.  (See illustration 3.)  Swivel
adapter must be free to rotate on the elbow.

2. Turn adapter clockwise to screw into blower housing until

tight. (See illustration 2.)

4. Attach full elbow threaded joint onto straight tube. Continue

attaching Straight Tubes until the preferred length is ac-
quired. Make sure all joints are screwed tightly into position
or the blower may vibrate and push tubes apart. (See illus-
tration 4.)

For models:
d25mhv, z25mhv, d30mha, d30mhv, i25mhv, i30mhv, BVM160, HB25150, HB30160, Vac Attack