Fujifilm FinePix F650 Manuel D’Utilisation

106

Connecting to a PC

If “CHECKING USB” appears and then 
[COMMUNICATION ERROR] is displayed on the LCD 
monitor, @ DSC is not selected in 

 USB MODE. 

Disconnect the USB cable (included) to the camera and 
restart the procedure from step C.

• Always use the FUJIFILM AC Power Adapter AC-5VX 

(sold separately). If the camera suddenly loses power 
during data exchange, the xD-Picture Card or internal 
memory could be damaged.

• Do not disconnect the USB cable (included) when the 

camera is communicating with a PC. If disconnecting 
the USB cable (included) during communication, the 
files on the xD-Picture Card or internal memory may 
cause damage.

• In Mac OS X, you must set the automatic setup when 

the first time you connect the camera to your PC.

• Make sure that USB cable (included) is connected 

correctly and pushed in.

• Perform pre-arranged steps to disconnect and turn off 

the camera (

➝p.108).

• When the camera and PC are exchanging data, the 

self-timer lamp blinks and the indicator lamp blinks 
alternately green and orange.

• Auto power off is disabled during USB connection.
• Before replacing the xD-Picture Card, always 

disconnect the camera from the PC. See p.108 for 
information on the disconnection procedure.

• The camera and PC may be exchanging data even 

when “Copying” disappears on your PC screen. Before 
disconnecting the USB cable (included), always check 
that the indicator lamp is off.

G Connect the camera to your PC using the USB cable 

(included).

H Press w for about 1 second to turn the 

camera on in Playback mode.

; 
USB socket