Hitachi c1424t Manuel D’Utilisation

8

❒  

Position the cursor on the CHILD LOCK menu and by pressing "

or 

" buttons, you may select ON or OFF. When

the CHILD CLOCK is ON and TV is in STAND-BY mode it can not be operated without the remote control hand set
and LED indicator lights up orange instead of red.

❒  

The clock is set automatically if program NR 1 is selected on screen for at least 6 seconds, provided the program
NR 1 has teletext data. You may also set the clock by using the 0…9 buttons.

Note: 

If you turn off the TV with the MAIN POWER button, the clock setting will be lost and must be reset.

❒  

Select WAKE TIME menu and chose ON or OFF using "

or 

" buttons. When you select ON, the timer menu

will appear, then set the WAKE TIME using the 0…9 buttons.

WAKE TIME menu will function only when the TV is in the STAND-BY mode and both CLOCK and WAKE TIME
programmes are stored.

❒  

Select the WAKE PR menu and using 0…9 buttons, set the program number to be switched on at the WAKE TIME.

By pressing the SLEEP button repeatedly, you can select one of the following settings:

0 -> 30 min -> 60 min -> 90 min -> 120 min -> 0. The set will turn off after the period of time you selected elapses.

If a broadcasting signal is not present for about 30 minutes, the set will be automatically turned off. In AV mode,
however, this function does not operate.

If the TV is switched off with the MAIN POWER switch, the SLEEP TIMER menu returns to 0 position automatically.

RECALL button is used to display the current program status on 
TV screen.

The teletext mode is only available if your TV is equipped with teletext (C1424T). 
The teletext service is carried on a TV transmission signal, therefore it is only available when receiving a TV
programme. Your choice of programme also governs which teletext service you will receive (CEEFAX for BBC1 and
2, Teletext for ITV and Channel 4). 

Channel

Time

SLEEP
Timer

PR N°