honda-automobiles tl5040 Manuel D’Utilisation

\ 

Fig. 25 

Fig. 26 

. 

Fig. 27 

1 

Driveline Universal Joints - Apply grease to 

2 Driveline - Disconnect driveline and separate 

each fitting using grease gun (Fig. 27). 

sections. Apply grease to male tube. 

Reassemble driveline. (Fig. 

8) 

3 Rotor Shaft Bearing - Apply 2-3 shots of 

grease to grease fitting at right end of rotor 
shaft using hand pump grease gun (Fig. 

26). 

4 

Input Gearbox - 

With tiller level, remove oil 

level check plug on rear of gearbox housing. 

Correct oil level is  at bottom of check plug. 

Add oil if necessary. Gearbox capacity 

14 oz. 

5 Lateral chain housing - With tiller level, 

remove oil level check plug on side of 
housing. Correct oil level is at bottom of 

check plug. Add oil if necessary. Chain 
housing capacity is 28 

oz. 

Chain Housing Oil 

........................................................ 

AGMA 

8EP Ind gear oil or SAE 

140 GL 5 gear oil 

(when the first oil is unavailable) 

Gearbox 

Oil 

...................................................................................................... 

SAE 90 or 80 W - 90 wt. oil 

Grease 

.............................................................................................................................. 

lithium base grease 

13