Fujifilm FinePix A900 Manuel D’Utilisation

Page de 164
132
Troubleshooting
Flash
Cannot use the 
flash.
The shutter button was pressed while the 
flash was charging.
Wait until the charging is completed 
before pressing the shutter button.
53
The Shooting mode is set to 
, ,, , 
, , 
or  .
Change the Shooting mode.
43, 44
The batteries have run out.
Load new or fully charged batteries.
16, 18, 
119
The flash is set to C SUPPRESSED 
FLASH mode.
Set to another flash mode excluding the 
C SUPPRESSED FLASH mode.
52
The flash settings 
are restricted and 
cannot be 
selected.
The Shooting mode is set to AUTO, 
, b, , 
,, ., 8, , , , 
, , , , ,  
or  .
The flash settings are restricted because 
the camera settings are tailored to the 
scene being shot. Change the Shooting 
mode for a wider range of flash settings.
43, 44, 
53
The playback 
image is dark 
even though the 
flash was used.
The subject is too far away.
Move to within the effective flash range 
before taking the picture.
51, 53
Your finger was covering the flash.
Hold the camera correctly.
27
Photographed 
images
The image is 
blurred.
The lens is dirty.
Clean the lens.
118
{ appeared when taking pictures.
Check the focus on the subject and take 
pictures.
29, 31, 
125
| appeared when taking pictures.
It may cause camera shake. Hold the 
camera steadily.
30, 125
There is speckling 
on the image.
The picture was taken with a slow shutter 
speed (long exposure) in a high-
temperature environment.
This is a characteristic of CCDs and does 
not indicate a camera fault.
Matters
Problems
Possible causes
Solutions
Page