Fujifilm FinePix A900 Manuel D’Utilisation

Page de 164
84
r Recording Movies
CHECK Recording movies
• Specifications: Motion JPEG (
➝p.149).
<FinePix A610> 
without sound
<FinePix A900/FinePix A825/FinePix A820/FinePix 
A800> 
Monaural sound
• Quality selection method: $ (320 × 240 pixels)
• Frame rate (
➝p.149): 30 frames per second (fixed)
MEMO
• The brightness and color of the LCD monitor shown 
during movie recording may differ from those shown 
before recording begins. 
• Pressing the shutter button down fully fixes the focus, 
however the exposure and white balance are adjusted 
to the scene being shot.
• If recording is stopped immediately after it begins, 
1 second of the movie is recorded onto the Memory 
Card or internal memory.
• See p.144-146 for information on recording times per 
Memory Card or internal memory.
CAUTION
• You may not be able to record a movie with sound when 
using FinePix A610. Check the “Specifications” in the 
“CHECK Recording movies” in the left column. 
• Because a movie is recorded onto the Memory Card or 
internal memory as it is saved, it cannot be recorded 
correctly if the camera suddenly loses power (if the 
batteries run out or the AC power adapter is 
disconnected).
• A movie file taken by FinePix A900/FinePix A825/
FinePix A820/FinePix A610/FinePix A800 may not be 
playable on other cameras.
• When using FinePix A900/FinePix A825/FinePix A820/
FinePix A800, sound is recorded concurrently with the 
images. So make sure not to cover the microphone with 
you finger when recording (
➝p.14).
• When using FinePix A900/FinePix A825/FinePix A820/
FinePix A800, camera operation noises may be 
recorded during movie shooting.
• If you shoot using the xD-Picture Cards with model 
numbers containing “M” such as DPC-M1GB, movie 
recording time may be reduced if you repeatedly record 
and erase (frame erase) image files.
In such a case, erase all frames or format the 
xD-Picture Card before use. Back up important frames 
(files) onto your PC or another media.