Fujifilm FinePix F40fd Manuel D’Utilisation

129

• FinePix F40fd / FinePix F45fd / FinePix F47fd is 

compatible with PTP (Picture Transfer Protocol). A 
PTP-compatible camera is a camera which can 
recognize the PC and printer automatically when 
connected.

• Always use the FUJIFILM AC Power Adapter AC-5VX 

(sold separately). If the camera suddenly loses power 
during data exchange, the Memory Card or internal 
memory could be damaged.

• Do not disconnect the USB cable (included) when the 

camera is communicating with a PC. If disconnecting 
the USB cable (included) during communication, the 
files on the Memory Card or internal memory may 
cause damage.

• In Mac OS X, you must set the automatic setup when 

the first time you connect the camera to your PC.

• Make sure that USB cable (included) is connected 

correctly and pushed in.

• Perform pre-arranged steps to disconnect and turn off 

the camera (

➝p.130).

• When the camera and PC are exchanging data, the 

indicator lamp blinks alternately green and orange.

• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect 

the camera from the PC. See p.130 for information on 
the disconnection procedure.

• The camera and PC may be exchanging data even 

when “Copying” disappears on your PC screen. Before 
disconnecting the USB cable (included), always check 
that the indicator lamp is off.

• Always use FinePixViewer to transfer images with voice 

memos to a PC.

D Set a PC.

The Windows CD-ROM may also be required during 
installation. In this event, change CD-ROMs as directed 
by the on-screen instructions.

• FinePixViewer automatically starts up and the Save 

Image Wizard window (Save Image dialog box) 
appears. Follow the instructions provided on screen to 
save the images. To proceed without saving the 
images, click the [Cancel] button.

• You can only see images saved on a PC. Save images 

on a PC.

• If you cancel saving by clicking the [Cancel] button, 

press Power to turn off the camera and then disconnect 
it from the PC.

Continued Q

*

Screen for Windows 2000 Professional