Fujifilm FinePix F40fd Manuel D’Utilisation

76

SHOOTING MENU

You can change the white balance for a photographed image 
by using colored paper instead of white paper.

• In AUTO mode, the correct white balance may not be 

achieved for subjects such as close-ups of people’s 
faces and pictures taken under a special light source. 
Select the correct white balance for the light source.

• When the flash fires, the white balance (except for 

custom white balance) setting for the flash is used. 
Consequently, to achieve a particular effect, the flash 
mode should be set to C Suppressed flash (

➝p.58).

• The specified custom white balance is retained until it is 

reset. This setting is retained even if the battery is 
removed.

• The color tones may vary depending on the shooting 

conditions (light source, etc.).

• After taking the picture, check the image color (white 

balance).

• Explanation of Terms “White Balance” (

➝p.163)

Use this mode to take pictures of a moving subject.

h: LONG PERIOD continuous shooting
k: FINAL 2 continuous shooting
f: TOP 2 continuous shooting

Set the exposure 
compensation again, using 
a negative value (–) when 
[OVER] appears and a 
positive value (+) when 
[UNDER] appears (

➝p.73).

Setting the menu (

➝

p.66)