Fujifilm FinePix F40fd Manuel D’Utilisation

84

p-MODE MENU (Playback)

You can receive image data by simply pressing buttons 
as the order below.
p 

➝  p ➝ MENU/OK

• Movie images cannot be transmitted.
• If the QUALITY of sending image data is over 3, 

QUALITY of the image will be set to 3.

• If “COMMUNICATION ERROR”, “CANNOT BE 

TRANSMITTED”, or “CANNOT BE RECEIVED” 
appears, press p or MENU/OK to retransmit the image 
data, or press DISP/BACK to cancel transmitting.

• Do not place anything between the transmitting and 

receiving device.

• Leaving the camera in direct sunlight or directly under 

fluorescent lighting may prevent successful data 
transfer.

• Successful transfer may not be possible when 

transmitting near infrared transmission devices (such 
as the remote controller of TV or VCR) or devices that 
generate electrical noise.

• Correctly aim the infrared port towards the front of the 

device or camera’s infrared port during image data 
transmission.

When playing back an image received from another 
camera, 

 will appear in the LCD monitor.

D Press MENU/OK to begin transmission.

When transmission is completed, “DATA 
RECEIVED” will appear on the LCD 
monitor.

Setting the menu (

➝p.81)