CyberResearch cpex p4-32-x Manuel D’Utilisation
CPEX Series
CyberResearch
®
CPU Cards
26
©Copyright 2005 CyberResearch, Inc.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of the
Selects the type of IDE drive. Setting to Auto allows automatic selection of the
appropriate IDE device type. Select CDROM if you are specifically configuring a
CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is
CD-ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is
either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA (Logical Block Addressing)/Large mode. Setting to Auto
Enables or disables the LBA (Logical Block Addressing)/Large mode. Setting to Auto
enables the LBA mode if the device supports this mode, and if the device was not
previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data transfer
from and to the device occurs multiple sectors at a time if the device supports
previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data transfer
from and to the device occurs multiple sectors at a time if the device supports
multi-sector transfer feature. When set to Disabled, the data transfer from and to
the device occurs one sector at a time.
the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
PIO Mode [Auto]
IDE Programmed I/O (PIO) Mode programs the timing cycle between IDE drive and
the programmable IDE controller. As PIO mode increases, the cycle time decreases.
Select [Auto] to let AMIBIOS select the PIO mode. If you select a specific value for
the programmable IDE controller. As PIO mode increases, the cycle time decreases.
Select [Auto] to let AMIBIOS select the PIO mode. If you select a specific value for
the PIO mode, you must be absolutely sure that the value you are selecting is
supported by the IDE being configured.
supported by the IDE being configured.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
DMA Mode [Auto]
Selects the DMA mode for the device.
Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]
Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]
[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows
SMART Monitoring [Auto]
SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows
AMIBIOS to use the SMART protocol to report server system information over a
network.
network.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer. If the host controller does not support
32-bit data transfer, this menu must be set to [Disabled]
32-bit data transfer, this menu must be set to [Disabled]
Configuration options:[Disabled] [Enabled]
Hard Disk Write protect [Disabled]
This menu allows you to enable or disable the hard disk write protect.
Hard Disk Write protect [Disabled]
This menu allows you to enable or disable the hard disk write protect.
Configuration options: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host & Device]
This menu allows you to configure the mechanism for detecting 80-pin ATA(PI)
This menu allows you to configure the mechanism for detecting 80-pin ATA(PI)
cable.
Configuration options: [Host & Device] [Host] [Device]
Configuration options: [Host & Device] [Host] [Device]