Ideal 61920 Manuel D’Utilisation
Page 18
9. Battery replacement
When the battery voltage warning symbol " " is displayed on the upper left of the LCD, replace the
batteries.
batteries.
(1) Remove the meter from all measuring sources.
(2) Turn off the meter.
(3) Loosen the battery cover-fixing screw on the back of the instrument.
(4) Remove the battery cover.
(5) Replace the (4) AA batteries with fresh ones noting the proper orientation illustrated inside the
(2) Turn off the meter.
(3) Loosen the battery cover-fixing screw on the back of the instrument.
(4) Remove the battery cover.
(5) Replace the (4) AA batteries with fresh ones noting the proper orientation illustrated inside the
battery compartment to ensure correct polarity.
(6) Re-install the battery cover and tighten the screw.
WARNING
• In order to avoid possible shock hazard, remove the meter from the conductor under test, remove
test leads from the meter, and turn off the instrument before removing the battery cover.
CAUTION
• Do not mix new and old batteries. Never use different types of batteries at the same time.
• Install batteries in the orientation as shown inside the battery compartment, observing correct
• Install batteries in the orientation as shown inside the battery compartment, observing correct
polarity.
ND 5417-1 61-920 Ins 9/26/06 8:49 AM Page 18