eutech-instruments cyberscan con 10 conductivitytds meter Manuel D’Utilisation

11

CyberScan CON 200                            25-pin connector

         2 (TxD) --------------------------------------- (RxD) 3

         4 (DSR) -------------------------------------- (DTR) 20

         5 (GND) -------------------------------------- (GND) 7

         7 (CTS) --------------------------------------- (RTS) 4

Refer to Figure 11 for the pin number position.

5

4

3

2

1

9

8

7

6

The meter uses hardware handshake i.e. the meter expects both DSR and CTS lines to be

active before it sends data. If the 

 key is pressed while the printer is not ready or if the

printer is off, the meter displays error by blinking the printer and the ERR annunciators

alternately, and waits for the printer to be ready. While the meter is displaying printer error, the

user may press the CAL/MEAS key to return to the measurement (MEAS) mode.