jetway v333ur1a Manuel D’Utilisation

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

This 2-pin connector connects to the case-mounted reset switch for rebooting your 
computer without having to turn off your power switch.  This is a preferred method 
of rebooting in order to prolong the lift of the system’s power supply.  See the figure 
below. 

(6)  Speaker connector: SPEAKER  
 

This 4-pin connector connects to the case-mounted speaker. See the figure below. 

The Power LED is light on while the system power is on.  Connect the Power LED 
from the system case to this pin.  

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the 
system.

 

 

  

 

 

This connector connects to a LAN card with a WAKE ON-LAN output.  This 
connector power up the system when a wake up signal is received through the LAN 
card. 

NOTE:  This feature requires that Wake On LAN or Ring In Wake up is enabled.