Panasonic DP-C406 Mode D’Emploi
28
User (U) / Jam (J) / Machine (E) Error Codes
User Error Codes (U Codes) / Machine Error Codes (E Codes)
z
NOTE on U13 and U14
A. When the Maintenance and Toner/Toner Waste Container Indicators are blinking
The machine will complete the current job and stop operating. To continue using the machine temporarily while waiting for a
replacement toner/container, press any key. (Ex: For Toner Waste Container, approximately 400 additional copies can be
made.)
replacement toner/container, press any key. (Ex: For Toner Waste Container, approximately 400 additional copies can be
made.)
B. When the Maintenance and Toner/Toner Waste Container Indicators light up
The machine stops and will not allow further operation until the Toner Waste Container is replaced.
z
When a user error occurs, the location and the procedures for
handling the user error are displayed frame by frame on the
Touch Panel Display. Check the location and handle the user
error according to the displayed pictures. Refer to the Operating
Instructions (For Maintenance) of provided CD-ROM.
handling the user error are displayed frame by frame on the
Touch Panel Display. Check the location and handle the user
error according to the displayed pictures. Refer to the Operating
Instructions (For Maintenance) of provided CD-ROM.
Ex: Front Cover
is opened.
Ex: Toner Waste
Container is almost full.
Ex: Toner Waste
Container is full.
User Error (Locations)
Error Location Indicator
<Inner>
Toner Cartridges
(Yellow/Magenta/Cyan/Black)
(Yellow/Magenta/Cyan/Black)
Toner Waste Container
OPC Drum Units
(Yellow/Magenta/Cyan/Black)
(Yellow/Magenta/Cyan/Black)
<Outer>
ADF Cover
Finisher Top
Cover (Option)
Cover (Option)
ADF
(Automatic Document Feeder)
(Automatic Document Feeder)
Section
Transport
Cover
(Option)
Cover
(Option)
Battery
Holder
Holder
Front Cover
Right Side
Cover
Cover
Feed Cover 1
ADU Cover
Feed Cover 2
Option Feed
Cover
Cover
z
Select “Close” to
continue the current
job temporarily.
continue the current
job temporarily.
z
Machine will stop.
Replace the Toner
Waste Container.
Replace the Toner
Waste Container.
E Codes:
Call the authorised Panasonic dealer when
machine Error Code (E Code) appears on the
Touch Panel Display.
Call the authorised Panasonic dealer when
machine Error Code (E Code) appears on the
Touch Panel Display.
Code
Check Points
U1
Front Cover is open.
U4
Finisher is pulled out.
U6
ADU Cover, Feed Cover 1, and/or Right
Side Cover is open.
Side Cover is open.
U7
Feed Cover 2 & Option Feed Cover are
open.
open.
U8
Transport Cover is open.
(When optional Paper Transport Unit is
installed)
(When optional Paper Transport Unit is
installed)
U11
Paper remains in the Finisher Bin.
(When optional Finisher is installed)
(When optional Finisher is installed)
U12
Finisher Top Cover and/or Staple Cover is
open.
(When optional Finisher is installed)
open.
(When optional Finisher is installed)
Code
Check Points
U13
Toner level is low, or has run out.
(See page 17)
(See page 17)
U14
Toner Waste Container is full.
(See page 17)
(See page 17)
U15
Toner Waste Container is not installed.
U20
ADF Cover is open.
U21
ADF is open while scanning from ADF.
U25
Toner is hardened. Shake Toner Cartridge
well.
well.
U28
OPC Drum Unit is not installed.
U29
OPC Drum Unit requires replacement.