Panasonic DP-C406 Mode D’Emploi
Chapter 2 Basi
c Fax Transmission
51
Getting an Outside Line Using PIN Code
Access
If your PBX requires a PIN (Personal Identification Number) code to access an external line, your
machine can be set to prompt the user to enter the PIN code before dialling.
This function is available when the Function Parameter “39 PIN Code Access” (Fax/Email Settings >
Fax Parameters) is set to “Suffix” or “Prefix”.
When “39 PIN Code Access” is set to “Prefix”, the dialling procedure is as follows.
(Available for some countries only.)
machine can be set to prompt the user to enter the PIN code before dialling.
This function is available when the Function Parameter “39 PIN Code Access” (Fax/Email Settings >
Fax Parameters) is set to “Suffix” or “Prefix”.
When “39 PIN Code Access” is set to “Prefix”, the dialling procedure is as follows.
(Available for some countries only.)
z
This feature is available in certain countries only.
z
This feature is not available when dialling from a connected external telephone.
z
The standard setting of “39 PIN Code Access” is set to “None”. For instructions on how to change the
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
standard setting, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) of
provided CD-ROM.
1
Place original(s).
z
Refer to Placing Originals (see page 14).
2
Press the Fax key.
3
Set “Quality Adj.” as required.
z
4
Select “Address Book”, and then
select a destination.
select a destination.
z
Refer to Entering a Destination (see page
20).
20).
5
Press the Start key.
6
Enter a PIN code, and then select
“OK”. (Up to 36 digits)
“OK”. (Up to 36 digits)
The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.
file number. Then starts dialling the telephone
number.
1
2
1
2