Panasonic UF-8100 Manuel D'Instructions

133

The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be replaced or 
refilled with ink.
To remove the stamp

NOTE

1. Please contact your local Authorized Panasonic dealer to purchase a new stamp.

Open the ADF Cover

1

2

Close the ADF Cover.

3

Remove the Stamp. Replace the stamp with a new one 
or refill the stamp with a few drops of the specified ink 
into the back of the stamp. 

 

(see Note 1)
Verification Stamp Order No.: 

REPLACE BATTERY
               U90

The machine has an internal battery (Product No.: CR2032) which 
maintains the date and time.
In the event the battery requires replacement, a message will be displayed.

1

2

3

: Turn the Power Switch on the 

Back Side of the machine to 
the OFF position.

: Remove a Screw and the 

Bettery Holder

1

2

"+" side of battery should 
be facing upwards.

 

(Observe the polarity, see 
CAUTION! below)

: Close the Battery Holder 

and reinstall a Screw (just 
removed).

: Turn the Power Switch on 

the Back Side of the 
machine to the ON position.

1

2

4

If the clock is flashing on the LCD Display, follow the 
procedures on page 104 to reset the clock.

NOTE:
The service life of the battery is approximately 1 year 
under normal use.

denotes hazards that could result in minor injury or damage to the machine.
THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR 
EQUIVALENT TYPE. "IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, 
RUPTURE OR EXPLOSION RESULTING IN INJURY OR FIRE. DISPOSE OF USED 
BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE 
OFFICIALS AND LOCAL REGULATION"

4

Keep button battery/stamp and small parts out of reach of children to prevent chocking or 
poisoning. If a button battery/stamp is swallowed accidentally, get medical treatment 
immediately.