Panasonic DP-C406 Mode D’Emploi
Chapter 2 SD
Print Settings
33
Colour Balance
Images can be printed with the adjusted density level (Darker, Medium, and Lighter) of Cyan, Magenta,
Yellow, and Black.
Yellow, and Black.
z
The density of each colour can be fine tuned for each of the three density levels.
z
This function is useful for the fine adjustment of colour photos. Unlike image editing software, this function
cannot greatly change the colour tone since the adjustable range at each density level is very narrow.
cannot greatly change the colour tone since the adjustable range at each density level is very narrow.
1
Select “Colour Balance”.
z
To display this screen, refer to steps 1 and 2
of Quality Adjusting (See page 27).
of Quality Adjusting (See page 27).
2
Select “Cyan”, and then adjust Darker
Areas, Medium Areas, and Lighter
Areas with “-” or “+”.
Areas, Medium Areas, and Lighter
Areas with “-” or “+”.
z
The density range from the darkest level
(100%) to the lightest level (0%) is equally
divided into three range areas.
(100%) to the lightest level (0%) is equally
divided into three range areas.
3
Select remaining colours, and then
adjust the Colour Balance as shown in
step 2.
adjust the Colour Balance as shown in
step 2.
4
Select “OK”.
z
The screen will return to step 1.
Select “OK”, and then proceed to step 4 of
Quality Adjusting (See page 27).
Select “OK”, and then proceed to step 4 of
Quality Adjusting (See page 27).
Darker Areas
Darkest area
Medium
Areas
Areas
Area between the darkest and
lightest areas
lightest areas
Lighter Areas Lightest area
1
2
1
2