Revel Performa3 B112 Manuel Du Propriétaire

9

If you want your subwoofer(s) to turn on along with another component 
that supplies a trigger voltage, use a mono 3.5mm cable (not supplied) 
to connect the 12V DC Trigger In connector to the trigger voltage out 
connector of the other component. 

To supply a trigger signal to an additional Performa3 subwoofer (or 
other triggerable device), use a mono 3.5mm cable (not supplied) 
to connect the 12V DC Trigger Out connector of the first Performa3 
subwoofer to the 12V DC Trigger In connector of the next Performa3 
subwoofer. Connect additional Performa3 subwoofers this way, in 
“daisy-chain” fashion.

NOTE: When using the 12V DC Trigger connectors, set the 
subwoofers’ Power Mode switches in the “Trigger” position.

After you have ensured that all connections have been correctly made, 
plug the supplied power cord into the subwoofer’s Power Cord connector 
and into a working unswitched AC power outlet.

Power Cord 

(supplied)

To 5V – 12V 

Trigger Source

To “Trigger In” 

Connector on Additional 

 Performa3 Subwoofer