Fujifilm FinePix F401 Mode D'Emploi
6
81
80
g POWER SAVE
SET–UP
If the power cuts out during data transmission, the data cannot be transmitted correctly. Always use the
AC power adapter when connecting the camera to a computer.
AC power adapter when connecting the camera to a computer.
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again. You can also take a picture by pressing
the shutter button all the way down.
●
!
Operation can also be restored by pressing buttons
other than the shutter button.
other than the shutter button.
ＳＥＴーＵＰ
ＳＥＴーＵＰ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＤＳＣ
ＤＳＣ
ＰＯＷＥＲ ＳＡＶＥ
ＰＯＷＥＲ ＳＡＶＥ
２ ＭＩＮ
２ ＭＩＮ
ＤＡＴＥ／ＴＩＭＥ
ＤＡＴＥ／ＴＩＭＥ
ＰＯＳＴＶＩＥＷ
ＰＯＳＴＶＩＥＷ
ＯＮ
ＯＮ
ＳＥＴ
ＳＥＴ
ＯＫ
ＯＫ
ＢＡＣＫ
ＢＡＣＫ
◆
To restore power to the camera
◆
1
2
Use the power switch to
turn the camera off briefly
1 and then on again 2.
turn the camera off briefly
1 and then on again 2.
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 minutes or 5
minutes), it is automatically switched off. Use
this function when you want to get the maximum
possible running time from the battery.
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 minutes or 5
minutes), it is automatically switched off. Use
this function when you want to get the maximum
possible running time from the battery.
●
!
Power Save is disabled when the camera is connected
to a USB port.
to a USB port.
The Sleep function does not operate when the
LCD monitor is switched off or when the camera
is in Setup or Playback mode. However, if the
camera controls are not used for some time (2
minutes or 5 minutes), the camera automatically
switches off.
LCD monitor is switched off or when the camera
is in Setup or Playback mode. However, if the
camera controls are not used for some time (2
minutes or 5 minutes), the camera automatically
switches off.
IN CONNECTION
6
Connection
DSC (Mass storage device) Mode
The “Connection” section explains how to connect the camera to your computer using the special USB
cable and describes the functions you can use once the camera and computer are connected. Refer
also to the Software Quick Start Guide booklet.
cable and describes the functions you can use once the camera and computer are connected. Refer
also to the Software Quick Start Guide booklet.
This mode provides a simple way to read
images from a SmartMedia and store images on
to a SmartMedia (
images from a SmartMedia and store images on
to a SmartMedia (
➡P.82).
You must install all the software before
connecting the camera to your computer.
Refer also to the Software Quick Start Guide
booklet.
connecting the camera to your computer.
Refer also to the Software Quick Start Guide
booklet.
The first time you connect the camera to your computer
PC CAM (camera) Mode
This function allows you to conduct
videoconferencing sessions between PCs
connected to the Internet. This function can also
be used to record video on a PC (
videoconferencing sessions between PCs
connected to the Internet. This function can also
be used to record video on a PC (
➡P.84).
●
!
Videoconferencing (“PictureHello”) is not
supported on Macintosh computers.
supported on Macintosh computers.
●
!
The PC Camera function cannot be used on Mac OS
X (including the Classic environment). Use a Mac
OS version between 8.6 and 9.2.
X (including the Classic environment). Use a Mac
OS version between 8.6 and 9.2.
Software Quick Start Guide
CD-ROM
(Software for FinePix EX)