Fujifilm FinePix F401 Mode D'Emploi

™

Use only the AC-5VS/AC-5VHS AC Power Adapter
with your FinePix F401 Digital Camera. The use of
other AC power adapters may result in damage to your
camera.
h The AC Power Adapter is only intended for indoor

use.

h Push the connection cord plug firmly into the DC input

socket.

h When unplugging the connector cord, switch the

camera off and pull out the plug by grasping the plug
itself. (Do not pull on the cord.)

h Do not use the AC power adapter with any device

except the specified device.

h During use, the AC power adapter will become hot to

touch, but this is normal.

h Do not disassemble the AC power adapter. Doing so

could be dangerous.

h Do not use the AC power adapter in a place with high

temperature and high humidity.

h Do not drop or subject the AC power adapter to

strong shocks.

h The AC power adapter may emit a humming noise,

but this is normal.

h If used near a radio, the AC power adapter may

cause static, so play the radio in a distant place.

✽Very occasionally, DC output will be prevented by the

operation of the internal protection circuit. In this
event, unplug the AC-5VS/AC-5VHS AC power

adapter from the power socket for a few moments
and then plug it in again. This will restore DC output.

■ Specifications (AC-5VS/AC-5VHS)

Power Supply

AC 100V to 240V, 50/60Hz

Rated Input Capacity 12W (U.S.A. and Canada)

0.15A to 0.24A (other countries)

Rated Output

DC 5.0V 1.5A (U.S.A. and Canada)
DC 5.0V 2.0A (other countries)

Temperature During Use 0°C to +40°C (+32°F to +104°F)

(U.S.A. and Canada)
0°C to +45°C (other countries)

Storage Temperature -10°C to +70°C (+14°F to +158°F)
Dimensions (MAX.)

47 mm 

× 20 mm × 72 mm

(1.9 in. 

× 0.8 in. × 2.8 in.)

(W 

× H × D) (U.S.A. and Canada)

49 mm 

× 40 mm × 65 mm

(W 

× H × D) (U.K.)

49 mm 

× 31 mm × 65 mm

(W 

× H × D) (other countries)

Mass (Weight)

Approx. 120 g (4.2 oz.)
(U.S.A. and Canada)

Approx. 200 g (7.0 oz.) (U.K.)

Approx. 180 g (6.4 oz.) 
(other countries)

Connection Cord Length Approx. 2 m (6.6 ft.)

✽ Please note that specifications and characteristics are

subject to change without notice.

■SmartMedia

The SmartMedia card supplied with your FinePix F401
camera is a new image recording medium developed
especially for use in digital cameras. Each SmartMedia
card contains a built-in semiconductor memory chip
(NAND flash memory) which is used for storing digital
image data.
Because the data is stored electronically, the stored image
data can be erased from the card and new data recorded.

■SmartMedia with IDs

The SmartMedia ID is a SmartMedia that has an
individually assigned identification number. SmartMedia
ID cards can be used with devices that use ID numbers
for copyright protection or other purposes. This camera
accepts SmartMedia ID cards in the same way as
conventional SmartMedia cards.

■Storing Data

In the situations listed below, recorded data may be
erased (destroyed). Please note that Fuji Photo Film
Co., Ltd. accepts no responsibility whatsoever for the
loss (destruction) of recorded data.

✽When the SmartMedia is used incorrectly by the

owner or a third party

✽When the SmartMedia is exposed to static electricity

or electrical noise

✽When the battery cover is opened or the SmartMedia

removed and the camera is then switched off during
data recording, during data erasing (SmartMedia
formatting) or during frame advance when images are
being played back.

■Notes on Handling SmartMedia

h Take care to hold the SmartMedia straight when you

load it into your camera.

h Never remove the SmartMedia or switch the camera

off during data recording, during data erasing
(SmartMedia formatting) or during frame advance
when images are being played back. These actions
could result in damage to the SmartMedia.

h Use only the SmartMedia specified for use with the

FinePix F401. The use of other SmartMedia could
damage the camera.

h SmartMedia are precision electronic devices. Do not

bend, drop, or subject SmartMedia to excessive
shocks.

h Do not use or store SmartMedia in environments

likely to be affected by strong static electricity or
electrical noise.

h Do not use or store SmartMedia in very hot, humid or

corrosive environments.

h Take care not to touch the SmartMedia’s contact area

or allow the area to become soiled. Use a dry lint-free
cloth to wipe away any soiling that does occur.

h To avoid damage caused by static electricity, always

use the special static-free case provided during
transportation or storage, or keep the SmartMedia in
a storage case if available.