Fujifilm FinePix A330 Mode D'Emploi

78

eThe table below lists the warnings that are displayed on the LCD monitor.

(Lit red)

(Blinking red)

The batteries in the camera are fully
depleted or very low on charge.

Load new or fully charged batteries.

|

There is a strong likelihood of camera
shake because the shutter speed is
slow.

Use flash photography. However, use a
tripod for some scenes and modes.

Outside the AE continuous range.

The picture can be taken, but the correct
brighthess (exposure) will not be obtained.

The AF (auto focus) cannot work
effectively.

i If the image is too dark, take the picture at

a distance of around 2 m (6.6 ft.) from the
subject.

i Use AF lock to take the picture.

No xD-Picture Card is inserted.

Insert an xD-Picture Card.

i The  xD-Picture Card is not

formatted.

i The  xD-Picture Card contact area

is soiled.

i Camera fault.

i Format the xD-Picture Card in the

camera.

i Wipe the contact area on the xD-Picture

Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the error message is still displayed,
replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The  xD-Picture Card is fully
recorded.

Erase some images or use an xD-Picture
Card that has ample free space.

i The file played back was not

recorded correctly.

i The  xD-Picture Card contact area

is soiled.

i Camera fault.
i You attempted to play a movie that

was not recorded on this camera.

i Images cannot be played back.

i Wipe the contact area on the xD-Picture

Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the error message is still displayed,
replace the xD-Picture Card.

i Contact your FUJIFILM dealer.
i Movies cannot be played back.

The frame number has reached
999–9999.

1 Insert a formatted xD-Picture Card into

the camera.

2 Set “RENEW” as the FRAME NO.

setting in the SET-UP menu.

3 Start taking pictures. (The frame

numbers start from “100-0001”.)

4 Set “CONT.” as the FRAME NO. setting

in the SET-UP menu.

i The  xD-Picture Card contact area

is soiled.

i The xD-Picture Card is damaged.
i The  xD-Picture Card format is

incorrect.

i Camera fault.

i Wipe the contact area on the xD-Picture

Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the error message is still displayed,
replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i The data could not be recorded due

to an xD-Picture Card error or a
connection error between the xD-
Picture Card and camera.

i The image cannot be recorded as it

is too large to fit in the available
space on the xD-Picture Card.

i Re-insert the xD-Picture Card or turn the

camera off and then on again. If the error
message is still displayed, contact your
FUJIFILM dealer.

i Use a new xD-Picture Card.

A protected file was encountered.

Protected files cannot be erased. Remove
the protection.