Radiolink Electronic Limited RL037T001A Manuel D’Utilisation
7-Channel Radio Control System
9
When the transmitter is initially turned on, the model type, model
memory name
, and transmitter battery voltage are displayed on the LCD
screen. When prompted by the user, the functions
and settings stored in the memory can also be read on the screen. The
user accesses the different functions using the MODE“▲”or“▼” key
and changes the values and settings using the DATA “+” or “-” key.
(This is called programming!)
Note
: Feel free to explore by scrolling through the programs and viewing the displays using the MODE“▲”or“▼” key. The
MODE“▲”or“▼” key only determine what will be displayed on the screen and will not change any of the settings. Only when
using the DATA “+” or “-” key will you be able to change any of the settings.
Model name
The RadioLink T7F-2.4GHz stores model memories for six models. This means all the data (control throws, trims, end
points, etc.) for up to six different models can be stored in the transmitter and activated at any time (depending upon which
model you choose to fly that day). This eliminates the requirement for reconfiguring the transmitter each time you decide to
fly a different model with it! When the transmitter is turned on the model type, model name, and the transmitter voltage will be
indicated on the LCD screen. Before every flight BE CERTAIN that the correct model name for the model you intend to fly
appears on the screen. If the transmitter is not operating the correct model, some (or all) of the controls could be reversed
and the travels and trims will be wrong.
Flying a model with the wrong program will result in a crash, so always be certain the model name in the transmitter is
correct. One way to ensure this is to write the corresponding model name directly on the airplane or helicopter, or attach a
list to the bottom or back of the transmitter.
LIQUID CHIP DISPLAY (LCD) & PROGRAMMING CONTROLS
Press MODE “▲” key to scroll to previous function menu
Press MODE “▼” key to scroll to next function menu
LCD display screen
Current model
memory name
Transmitter
Battery voltage
Current model
type
MODE
“▲”or“▼”
key
- Used to scroll through
and display the different functions.
SELECT key
- Used to scroll the sub-menu
for the current function.
DATA
“+” or “-” key
- Used to change the values of the
various functions displayed on the LCD screen
POWER switch
To open programming menu:
Press
MODE“▲”and “▼”
keys simultaneously and hold for one second