Spectralink Corporation 875X Manuel D’Utilisation
Spectralink 87-Series Wireless Telephones User Guide
UserGuide-draft01.docx
Month 2013
Month 2013
27
Opening the Dialer from the Session Screen
If you want to place a call during an active call, you can open the Dialer. When you begin to dial
the new number, the Autocomplete cells will replace the session cells of active calls until the
new call begins to ring. Open the Dialer during active calls using one of the following ways:
the new number, the Autocomplete cells will replace the session cells of active calls until the
new call begins to ring. Open the Dialer during active calls using one of the following ways:
On-Hook If On-Hook dialing is enabled, press the Hold softkey and then press a
number key (0-9) to start dialing. The Dialer displays the number in the dial cell. You can
place the call when you finish entering the numbers or, if the Autocomplete feature
matches the number you are dialing to a stored number, select the matching number
and press Start to place the call. You can enable or disable On-Hook dialing from the
Home screen by navigating to Settings > Basic Settings > Preferences > On-Hook
Dialing.
place the call when you finish entering the numbers or, if the Autocomplete feature
matches the number you are dialing to a stored number, select the matching number
and press Start to place the call. You can enable or disable On-Hook dialing from the
Home screen by navigating to Settings > Basic Settings > Preferences > On-Hook
Dialing.
Press the Start key Pressing the Start key places the active call on hold and opens
the Dialer. You can listen for a dial tone. Enter the number manually or select a number
from the Autocomplete list as you begin to dial.
from the Autocomplete list as you begin to dial.
Managing Calls
This section shows you how to manage incoming calls. The handset can alert you of incoming
calls using one of many different ringtones. Ringtones are played through the handset speaker
unless you have silenced the handset speaker. If you are wearing a headset, you will hear an
in-ear notification instead of a speaker alert.
calls using one of many different ringtones. Ringtones are played through the handset speaker
unless you have silenced the handset speaker. If you are wearing a headset, you will hear an
in-ear notification instead of a speaker alert.
User Tip: Adjusting the ringer volume
While the handset is alerting you of an incoming call, you can increase or decrease
the ringer volume using the volume buttons. The handset will use this new ringer
volume setting until you log off or power cycle the handset (turn the handset off and
then on again).
the ringer volume using the volume buttons. The handset will use this new ringer
volume setting until you log off or power cycle the handset (turn the handset off and
then on again).
Much of this chapter refers to handset icons that will become familiar as you use the handset.
The icons differ depending on the type of session you are in, but all of the icons display in the
Session Manager. The following table gives you an overview of the session icons.
The icons differ depending on the type of session you are in, but all of the icons display in the
Session Manager. The following table gives you an overview of the session icons.
Session Icons
Icons display on the left side of the call cell to indicate the status of that call. The number
indicates which line the call is using.
indicates which line the call is using.