Eaton 5PX 1500VA 5PX1500IRT Fascicule

Codes de produits
5PX1500IRT
Page de 2
In the interests of continuous product improvement all specifications are subject to change without notice. 
© 2011 Eaton Corporation, All Rights Reserved, 00DATA1018176 Rev A, February 2011.
  Graphical LCD display :
  - Clear information on UPS status 
  and measurements 
  - Enhanced configuration capabilities 
  - Available in 7 languages
  Panel for batteries replacement 
(Hot swappable)
  1 USB port + 1 serial port + remote 
ON/OFF and remote power OFF 
inputs
 External battery (EBM) connector 
  8 IEC 10A + 1IEC 16A sockets 
with energy metering (including 4 
programmable sockets)
  Communication card slot
TECHNICAL SPECIFICATIONS
1500
2200
3000
Rating (VA/W)
1500 VA / 1350 W
2200 VA / 1980 W
3000 VA / 2700 W
Format
RT2U (tower / rack 2U)
RT2U (tower / rack 2U)
RT2U & RT3U
Electrical characteristics
Technology
Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Input voltage and frequency ranges without  
using batteries
160V-294V (adjustable to 150V-294V) 47 to 70 Hz (50 Hz system),  
56.5 to 70 Hz (60 Hz system), 40 Hz in low-sensitivity mode
Output voltage and frequency
230 V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60 Hz +/- 0.1 % (autosensing)
Connections
Input
1 IEC C14 (10 A) socket
1 IEC C20 (16 A) socket
1 IEC C20 (16 A) socket
Outputs
8 IEC C13 (10 A)
8 IEC C13 (10 A) sockets 
1 IEC C19 (16 A) socket
8 IEC C13 (10 A) sockets 
1 IEC C19 (16 A) socket
Remotely controlled sockets
2 groups of 2 x IEC C13 (10 A)
Additional outputs with HS MBP
4 FR/Schuko sockets or 3 BS sockets or 6 IEC 10 A sockets or terminal blocks (HW version)
Additional outputs with FlexPDU
8 FR/Schuko sockets or 6 BS sockets or 12 IEC 10 A sockets
Batteries
Typical backup times for 50 and 70% load*
5PX
19/11 mn
15/8 mn
14/9 mn
5PX + 1 EBM
90/54 mn
60/35 mn
66/38 mn
5PX + 4 EBM
285/180 mn
210/125 mn
213/121 mn
Battery management
ABM® & Temperature compensated charging method (user selectable), Automatic battery test, deep dis-
charge protection, automatic recognition of external battery units
Interfaces
Communication ports
1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously)  
+ 1 mini terminal block for remote ON/OFF and Remote Power Off
Communications card slots
1 slot for NMC Minislot card (included in Netpack versions) or NMC ModBus/JBus or MC Contacts/Serial
Operating conditions, standards and approvals
Operating temperature
0 to 40°C
Noise Level
< 45 dBA
< 45 dBA
< 50 dBA
Performance - Safety - EMC
IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2  (EMC), IEC/EN 62040-3 (Performance),
Approvals
CE, CB report, TÜV
Dimensions W x D x H / Weight
UPS Dimensions 
441 x 522 x 86,2 (2U) mm
441 x 522 x 86,2 (2U) mm
441 x 647 x 86,2 (RT2U) mm 
441 x 497 x 130,7 (RT3U) mm
UPS Weight
27.6 kg
28.5 kg
38.08 (RT2U) - 37.33 (RT3U)
Dimensions of EBM
same as UPS
Weight of the EBM
32.8 kg
32.8 kg
46.39 (RT2U) - 44.26 (RT3U)
Customer Service & Support
Warranty
3 years on electronics, 2 years on batteries
* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Part Numbers
1500
1500 Netpack*
2200
2200 Netpack*
3000 (RT3U)
3000 Netpack* (RT2U)
UPS
5PX1500iRT
5PX1500iRTN
5PX2200iRT
5PX2200iRTN
5PX3000iRT3U
5PX3000iRTN
EBM
5PXEBM48RT
5PXEBM48RT
5PXEBM48RT
5PXEBM48RT
5PXEBM72RT3U
5PXEBM72RT2U
* Network Management Card included as standard in Netpack versions
Eaton 5PX UPS
Eaton 5PX 3000i RT2U