APC Dell Sliding Rail Kit for 2400/2450 - 1 set AR8004 Fascicule
Codes de produits
AR8004
Retrofit Kit for Dell
®
2450/2400
Servers — AR8004
990-6047
1/2
07/2000
Overview
Use this kit to mount a Dell
®
model 2450 or 2400 server into an American Power Conversion (APC)
NetShelter enclosure.
Inventory
Tools Required
• Phillips screwdriver
• Pencil
• Pencil
Mounting Instructions
Item
Qty
Right Slide Assembly
1
Left Slide Assembly
1
Right Server Adapter Plate Assembly
1
Left Server Adapter Plate Assembly
1
10-32 × 5/8" Phillips Pan Head Screw
4
Flat Washer
4
10-32 Caged Nuts
2
Step
Action
Figure
1
Choose a location for the server on the vertical
mounting rails according to server model, and
mark the top and bottom of the chosen U-space
on the front and rear vertical mounting rails. (A
U-space consists of a notched mounting hole and
one hole immediately above and below it.)
mounting rails according to server model, and
mark the top and bottom of the chosen U-space
on the front and rear vertical mounting rails. (A
U-space consists of a notched mounting hole and
one hole immediately above and below it.)
Caution: Plan to place heavier components
towards the bottom of the enclosure.