Silex SX-550-0700 E1038 Manuel D’Utilisation
Codes de produits
E1038
FCC Information (SX-550-2701 only)
FCC ID: N6C-SX10WAGIT
NOTICE
In accordance with FCC Part 15, the SX-550-2701 is listed as a Modular Transmitter device. End
products that include the SX-550-2701 shall have the words “Contains Transmitter module FCC ID: N6C-
SX10WAGIT” on an exterior label.
products that include the SX-550-2701 shall have the words “Contains Transmitter module FCC ID: N6C-
SX10WAGIT” on an exterior label.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. As noted in the previous section, however, it is the
responsibility of the OEM to ensure that his device meets the limits for a Class B digital device when the
SX-550-2701 is installed in it.
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. As noted in the previous section, however, it is the
responsibility of the OEM to ensure that his device meets the limits for a Class B digital device when the
SX-550-2701 is installed in it.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a different circuit from that to which the receiver is
connected
connected
•
Consult the dealer or an experienced radio/TV technician for help.
The transmitter must not be co-located or operated in conjunction wit any other antenna or transmitter.
The available scientific evidence does not show that any health problems are associated with using low
power wireless devices. There is no proof, however, that these low power wireless devices are absolutely
safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to
low-level RF that does not produce heating effects causes no known adverse health effects. Many
studies of low-level RF exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been confirmed by additional
research.
power wireless devices. There is no proof, however, that these low power wireless devices are absolutely
safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to
low-level RF that does not produce heating effects causes no known adverse health effects. Many
studies of low-level RF exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been confirmed by additional
research.
To satisfy RF exposure requirements, this device and its antenna(s) must operate with a separation
distance of at least 20 centimeters from all persons and must not be co-located or operated in conjunction
with any other antenna or transmitter. End-users must be provided with specific operating instructions for
satisfying RF exposure.
distance of at least 20 centimeters from all persons and must not be co-located or operated in conjunction
with any other antenna or transmitter. End-users must be provided with specific operating instructions for
satisfying RF exposure.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
user’s authority to operate the equipment.
Part Number 40183-101
Silex SX-550 Developer's Guide
Page 108