Omnitron iConverter T3/E3 8743-1-W Manuel D’Utilisation
Codes de produits
8743-1-W
MANAGEMENT
Page 2
SPECIFICATIONS
iConverter
T3/E3
Model Type
T3/E3
Protocols
ANSI: T1.102, T1.107, T1.404, T1-404a (T3)
ITU: G.703, (E3), G.751, O.151
ETSI: EN 300 689, 300 686, 300 687
ITU: G.703, (E3), G.751, O.151
ETSI: EN 300 689, 300 686, 300 687
UTP Connectors
RG-59 Coax, 75 ohm, BNC
DS3: 380m
E3: 440m
Fiber Connectors
SFP:
Dual Fiber:
Single-Fiber:
Dual Fiber:
Single-Fiber:
LC
SC, ST, LC
SC
SC, ST, LC
SC
Controls
T3/E3 Select, Coax Build-Out, Coax Enable/Disable, Fiber
Enable/Disable, AIS to Fiber, AIS to Coax, PRBS to Coax,
Loop-Back Coax, Loop-Back Fiber, Loop-Back Remote
LED Displays
Power, Fiber Act, Coax Act, Fiber AIS Det, Coax AIS Det,
Coax PRBS Det, Fiber Test, Fiber Loop-Bk, Coax Loop-Bk
DC Power
Plug-in:
Standalone:
Standalone:
0.7A @ 3.3VDC (typical)
Voltage Range: 5 - 32VDC
Voltage Range: 5 - 32VDC
0.3A @ 9VDC
DC Power Connector
Plug-in:
Standalone:
Standalone:
Power supplied by backplane
2.5mm Barrel Connector or Terminal
2.5mm Barrel Connector or Terminal
Connector
AC Power Adapter
[US]
Plug-in:
Standalone:
Standalone:
N/A
120VAC/60Hz
120VAC/60Hz
0.05A @ 120VAC
AC Power Adapter
[Universal]
Plug-in:
Standalone:
Standalone:
N/A
100-240VAC/50 to 60Hz
100-240VAC/50 to 60Hz
0.05A @ 120VAC
Dimensions
Plug-in:
Standalone:
Standalone:
W:0.85” x D:4.5” x H:2.8”
W:3.8” x D:4.8” x H:1.0”
W:3.8” x D:4.8” x H:1.0”
Weight
Plug-in:
Standalone:
Standalone:
8 oz
1 lb
1 lb
Compliance
UL, CE, FCC Class A
Temperature
Standard:
Wide:
Extended:
Storage:
Wide:
Extended:
Storage:
0 to 50º C
- 40 to 60º C
- 40 to 75º C
- 40 to 80º C
- 40 to 60º C
- 40 to 75º C
- 40 to 80º C
Humidity
5 to 95% (non-condensing)
Altitude
- 100m to 4000m
MTBF (hrs)
Plug-in:
Standalone
Standalone
without power adapter
Standalone
Standalone
with US power adapter:
Standalone
Standalone
with Universal adapter:
480,000
490,000
250,000
100,000
Management of the plug-in module is accomplished by using
a Management Module¹ (such as an iConverter NMM2 or
10/100M2) that provides monitoring, configuration and trap
notification. The management module can be accessed via
SNMP, Telnet, or serial port. The SNMP-based management
is accomplished via Omnitron’s intuitive, graphic-oriented
NetOutlook management software or third party SNMP
management software, while the Telnet and the serial interfaces
have an easy-to-use, menu-driven interface.
Some of the real-time T3/E3 parameters that can be monitored
Some of the real-time T3/E3 parameters that can be monitored
include power, port link and data receive status, module
operating modes, module type and model number, hardware
and software revisions levels and serial numbers.
All of the T3/E3 hardware DIP-switch functions can be remotely
All of the T3/E3 hardware DIP-switch functions can be remotely
configured via the software including protocol selection (T3/
E3), line build-out options, port enable/disable control and all
local and remote loopback and data patterns.
The T3/E3 module generates a wide variety of user-defined
The T3/E3 module generates a wide variety of user-defined
traps on port state changes, including link-up and link-down,
AIS and PRBS data received, and upon entering and exiting
the remote loopback mode. Monitoring of specific traps can
be selectively enabled or disabled.
¹ For complete management support, use a M2 series module
(NMM2, GX/TM2, 2GXM2, 10/100M2, 2FXM2) or higher.
APPLICATION DIAGRAM
T3/E3 media converter provides a cost-effective solution
for extending telecom demarcation points. A pair of T3/
E3 converters is used to extend the demarcation between
buildings via fiber. Multimode or single-mode fiber can be
used, and fiber links can be extended up to 120km using
single-mode fiber.